When receiving an A2 (German) program
Broadcasting
A2 (German) stereo
A2 (German) bilingual
Receiving area for NICAM and A2 (German) programs
System
NICAM
A2 (German)
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
"MONO". The sound becomes monaural, but the noise is reduced.
• Before receiving a NICAM stereo program in China, please check the
NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
Press A/B repeatedly until "MONO" appears on the screen.
To cancel the monaural sound setting, press A/B again until
"AUTO" appears on the screen.
Notes
• The "MONO" or "AUTO" setting is memorized for each program
position.
• You cannot receive a stereo broadcast signal when the projection TV is in
the "MONO" setting. Normally, set the projection TV to "AUTO".
01GB07ADV-p65
On-screen display (Selected sound)
MONO
(Regular sound)
MAIN
(Main sound)
Receiving area
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
Australia, Malaysia, Thailand, etc.
MONO
27
Sony KP-FX53/FX43 M61 (GB/FR/CT/CS/PR/AR).4-090-470-21 (1)
STEREO
(Stereo sound)
SUB
(Sub sound)
AUTO
Advanced Operations
02.8.21, 5:17 PM
27