LG LSC27931SB Service Manual page 9

3. HOW TO CONTROL THE AMOUNT OF WATER SUPPLIED TO ICEMAKER
3-1. Confirm the amount of water supplied to the icemaker.
1) Confirm the amount of water supplied to the icemaker
(1) Press the button (Figure 1) to selsct the level of water (Optimum level ¡æLarge ¡æ Small.)
2) Icemaker Operation Test (Test mode)
(1) Press the button (Figure 1) for more than 3 seconds and It will start the T est mode.
(2) T est the operation of the operating part of the icemaker.
(3) If there is no problem with the operation, water is supplied through the water tube (up to the
(4) The test mode is completed after the water is supplied.
Note : When using the test mode more than twice consecutively, water can overflow.
* It is acceptable if the adjusted level of water is a bit smaller than optimum level.
selected lebel of water).
When the water overflows, wipe the ice storage bin.
Check water level
- 8 -
Water Amount
Indicator Light
Power
Water Amount
Switch
Selection Button
Figure 1.
Feeler
Arm