CLAIMS.
3. Refrigeration
4) No cooling air circulation.
is weak.
Faulty fan motor.
Small cooling air
discharge.
5) Compressor capacity.
6) Refrigerant
too much or too little.
7) Continuous operation
- No contact of temperature controller. - Foreign materials.
8) Damper opens continuously.
Foreign materials
jammed.
Failed sensor. - Position of sensor.
Characteristics
of damper.
9) Food storing place. - Near the outlet of cooling air.
CAUSES AND CHECK POINTS.
Fan is
Fan shroud contact. - Clearance.
constrained.
Damping evaporator contact.
Accumulated residual frost.
Insufficient
Fan overload. - Fan misuse.
motor RPM
Bad low termperature RPM characteristics.
Rated power misuse.
Low voltage.
Faulty fan.
Fan misuse.
Bad shape.
Loose connection. - Not tightly connected.
Insert depth.
Shorud.
Bent.
Ice and foreign materials on rotating parts.
Rating misuse.
Small capacity.
Low valtage.
Malfunction of charging cylinder.
Wrong setting of refrigerant.
Insufficient compressor. - Faulty compressor.
Adiabatics liquid dump.
The EPS (styrofoam) drip tray has sediment in it.
A screw or other foreign material has fallen into the drip
tray or damper.
Bad characteristics of its own temperatue.
Parts misuse.
Charge of temperature - Impact.
characteristics.
- 45 -
HOW TO CHECK
• Check visually after
disassembly.
• Check visually after
disassembly.