Adjusting The Crossover Frequency - JVC KW-ADV64BT Instructions Manual

Adjusting the sound precisely
Perform steps and of "Selecting a
preset sound mode," then...
Select a band.
Adjust the sound.
Reset Changes level of Low/Mid/
High to 0.
Freq Selects frequency.
Q Adjusts the width of the
frequency.*
Bass Activates/deactivates bass.*
SW Level Adjusts subwoofer level.
The adjustments are overwritten if <User>
setting has been made (
is activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
steps and .
1
*
2
*
1
2
page 39), and <User>
40
Adjusting the crossover
frequency
On <AV Menu> screen:
Select the item to adjust, then make
adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Adjusts the crossover for subwoofer (low pass filter).
Adjusts the crossover frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.
* Freq Through