Adjusting The Crossover Frequency - JVC KW-NSX700 Instruction Manual

Adjusting the sound precisely
1 1
Perform steps and
preset sound mode," then...
2
Select a band.
3
Adjust the sound.
Reset Changes level of Low/Mid/
High to 0.
Freq Selects frequency.
Q Adjusts the width of the
frequency.*
Bass Activates/deactivates bass.*
SW Level Adjusts subwoofer level.
The adjustments are overwritten if <User>
setting has been made (
is activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
2 3
steps and .
* 1 Fixed for "High" band.
* 2 Only for "Low" band.
Adjusting the crossover
2
of "Selecting a
frequency
1
2
3
1
2
page 39), and <User>
* Not selectable when <Freq> is set to <Through>.
40
On <HOME> screen:
Select the item to adjust, then make
adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Adjusts the crossover for subwoofer (low pass filter).
Adjusts the crossover frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.