Por manual de instrucciones e
información de garantía en español
visítenos en www.hmdxaudio.com
Thank you for spreading the
Jam and purchasing the
HMDX JAM Classic Wireless
Speaker.
Be sure to check out the
entire JAM product line on
our website:
www.hmdxaudio.com —
Where there's a Jam
there's a party!
Charging the Unit
Controls
1
Power Switch
2
Play/Pause Button
3
Volume Controls
4
Bluetooth Indicator
5
Line-In Audio Jack
6
Charging Port
7
Battery Status Indicator
Indicators
Indicator
Flashing RED
CHARGE
RED
(when
GREEN
charging)
Quick Flash BLUE Pairing Mode
Slow Flash BLUE Connected
RED
Listening to your device wirelessly over Bluetooth
To listen to your music over Bluetooth wireless connection, you need
to pair your device with JAM Classic:
1. Make sure your device has Bluetooth capability.
2. Slide POWER SWITCH to turn on the unit, indicator will begin to
flash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting JAM CLASSIC from your
Bluetooth listings on your device or selecting YES.
5. Press play on your device and use controls on the unit to adjust
desired volume.
NOTE:
• Once you have successfully paired your device, you typically will
not need to repeat the above steps. Please ensure the unit
source is set to Bluetooth and your device has Bluetooth enabled.
• When pairing with a computer please consult your computer
manufacturer for Bluetooth pairing instructions and/or Bluetooth
Drivers.
• A pairing code is not required.
Package Contents
User Manual
Charging Cord
Approximately 3 hours required
for full charge. Can be charged
by using the USB to Micro USB
cord (included) through
computer or AC adapter with
USB jack (not included).
Note: Battery will last up to
4 hours when connected
wirelessly and up to 12 hours
when connected through
Aux-In Audio Jack.
3
L I N E
5
Status
Low Battery
Charging
Fully Charged
Line-in Mode
CLASSIC
CLASSIC
Instruction Manual
and Warranty
Information
Speaker
1
2
4
6
I N
R G E
C H A
HX-P230
R G E
C H A
7
®