HMDX jam PLUS Instruction Manual And Warranty Information

Por manual de instrucciones e
información de garantía en español
visítenos en www.hmdxaudio.com
Thank you for spreading the
Jam and purchasing the
HMDX Jam Plus Wireless
Speaker. Be sure to check
out the entire JAM product
line on our website:
www.hmdxaudio.com —
Where there's a Jam
there's a party!
Charging the Unit
Approximately 3 hours required for full charge. Can be charged
by using the USB to Micro USB cord (included) through computer
or AC adapter with USB jack (not included).
Note: Battery will last up to 4 hours when connected wirelessly.
Controls
1
Power Button
2
Speaker Mode Switch
3
Charging Port
4
Line-In Audio Jack
5
Battery Status Indicator
6
Volume Down
7
Play/Pause Button
Volume Up
8
Bluetooth Indicator
9
®
10
Jam
2
Indicators
Battery
Status
Indicator
Solid Red Charging
Slow Blinking Low Battery
Red
Note: When unit is fully charged
Red light will be o .
Pairing a Single Jam Plus Speaker (Mono)
To listen to your music over Bluetooth
to pair your device with Jam Plus:
1. Make sure your device has Bluetooth
2. Press and hold power button for 5 seconds; indicator will begin
to ash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting JAM PLUS from your
Bluetooth listings on your device or selecting YES.
®
5. Press play on your device and use controls on the unit to adjust
desired volume.
NOTE:
• Once you have successfully paired your device, you may not need
to repeat the above steps. Please ensure the AUX cable is unplugged
and your device has been Bluetooth
• When using only one Jam Plus, make sure that the switch is set to
Mono. You will not be able to pair with the speaker if it is set to
"L" or "R".
• When pairing with a computer, please consult your computer
manufacturer for Bluetooth
Bluetooth Drivers.
®
• A pairing code is not required.
Pairing 2 Jam Plus speakers together (Stereo)
To pair 2 Jam Plus speakers together for stereo sound please follow
the below steps:
1. Turn 1 speaker over and move the speaker mode switch to L.
2. Turn the other speaker over and move the speaker mode switch to R.
3. Press and hold power button for 5 seconds on one speaker.
4. Press and hold power button for 5 seconds on other speaker.
5. Speakers will begin to pair together automatically.
6. Paring process can take up to 30 seconds — once you hear the
steel drum tone and the Jam
you may pair to your device.
Instruction Manual
Package Contents
User Manual
Charging Cord
Bluetooth
Status
Indicator
Quickly Flashes BLUE Pairing Mode
Slowly Flashes BLUE Paired
RED Line-In Mode
wireless connection, you need
®
capability.
®
enabled.
®
pairing instructions and/or the latest
®
indicator light begins to slowly ash,
2
PLUS PLUS
and Warranty
Information
Jam Plus
1
2
4
3
5 6 7
10
HX-P240
8 9