HMDX HX-P120 Quick Start Manual

Hey. Have we seen you here before?
Register your speaker at www.hmdxaudio.com.
using it is like gold for the people who make these speakers. Do them a solid, will ya?
HX-P120
Por manual de instrucciones e información de garantía en español visítenos en
www.hmdxaudio.com
HMDX is pretty much short for awesome. Because you're
rocking out to one tonight and every night from now on,
prepare for an awesome night too, you awesome you.
The HMDX Neutron has friends—like lots of them. Invite them
along next time for an even more epic night. You can check
out all their online profiles at www.hmdxaudio.com.
Setup is pretty easy, but we put a manual together just in case
you need it. It's full of information and sarcasm—just like that
English teacher you had that crazy semester.

Package Contents

User Manual
Speaker

Just Charge It

Charging the speakers is so easy you've
probably figured it out by now, but just in
case, you've got two options: your
computer or a wall outlet.
1. The cord that came with the
speaker—the one with the USB on one
end and the Micro USB on the
other—will work with your computer.
2. If you want to use the wall outlet, you'll
need to pick up a power cord with a
Micro USB the next time you're at the
store, or use any USB AC adapter,
including the one for your cell.
Now go get ready for an epic night while your speaker does too. It needs
about 3 hours of me time for 4 hours of party time. For a longer party, plug it
in using the aux cord for 12 hours of play.
Control Your Destiny...or at Least Your Speaker
1. That's the power button.
2. Push it to play, push it again to pause.
3. Turn the music up or down. (Wait,
why do you need to turn it down?)
4. That light lets you know when
Bluetooth has the hook-up.
5. That's the mic.
6. The power cord goes here.
7. Hook it up old-school.
8. Easy pull tab.
Bluetooth Connection: It's a Setup
®
Like any amazing couple, this one starts with a connection—one between
your device and the speaker's Bluetooth.
Here's how it works:
1. We know you're probably going to think, "derp" with this one, but we
have to say it: Make sure the smartphone, tablet or computer you want to
hook up to the speaker has Bluetooth. (There. We got that out of the way.)
2. Turn on the speaker and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don't know
what you're using. We're not spies.)
4. Look for HMDX NEUTRON in your device's Bluetooth list or click
YES—whatever pops up on your device—and BAM! you're connected.
5. Now hit PLAY on your speaker and crank it up—or down if you're lame.
You're probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will find each other every time just as long as the speaker is set to
Bluetooth and your device's Bluetooth is, you know—on.
If you're connecting to a computer, you may have some extra steps on that
end. You'll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter "0000" as the code.
To clear the pairing history hold the PLAY/PAUSE button for 5 seconds.

Allow Us to Shed Some Light

What It Looks Like
Flashing RED
RED (when plugged in)
CHARGE
Light turns off (when
plugged in)
Quick Flash BLUE
Slow Flash BLUE
RED
Information like where you bought it and how you're
USER GUIDE AND WARRANTY INFORMATION
Charging Cord
3
8
6
7
What it Means
Low Battery
Charging
Fully Charged
Pairing Mode
Connected
Line-in Mode
2 3
1
5
4