Brake Pedal Assembly - MTD 700 Series Professional Shop Manual

FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983

Brake pedal assembly

NOTE: Use new cotter pins on reassembly.
NOTE: Confirm correct operation of the brake / clutch pedal mechanism before returning the mower to ser-
vice.
www.mymowerparts.com
Brake pedal assembly
Figure 6.24
1. Remove the cutting deck to gain access to the link-
age. See Figure 6.24.
2. Mark or make note of the linkage connections and
orientations relative to the brake pedal assembly.
3. Disconnect the extension spring that reaches forward
from the brake pedal assembly
4. Remove and discard the cotter pins that secure the
brake rod and the tensioner pulley control rod to the
brake pedal assembly. Disconnect the rods.
5. Remove the pedal support brackets from the frame
using a 1/2" wrench, and lower the pedal assembly
out of the tractor.
6. Brake pedal assembly installation can be accom-
plished by reversing the removal process.
Hydrostatic Transaxles
85