FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Adjustment nut
www.mymowerparts.com
Figure 5.84
Auto-Drive CVT Drive System
35f. Set the clearance between the pads and rotor
to 0.010-0.015" (0.25-38mm) using the adjust-
ing nut on the brake yoke.
See Figure 5.84.
35g. Re-hook the brake spring to the brake arm
36. Re-install the shift rod pillow block.
37. Give the transaxle a final spin-test before installation.
73