MTD 700 Series Professional Shop Manual page 69

FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Detent screw hole
www.mymowerparts.com
Detent ball
Detent spring
Detent screw
Figure 5.60
Figure 5.61
Brake yoke
Figure 5.62
Auto-Drive CVT Drive System
5. Use a magnet, or turn the transaxle upside-down to
remove the detent ball and spring.
See Figure 5.60.
6. Disassemble the brake:
6a. Unhook and remove the brake spring.
See Figure 5.61.
6b. Unbolt the brake yoke from the transaxle using
a 3/8" wrench. See Figure 5.62.
63