MTD 700 Series Professional Shop Manual page 61

FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Remove nut and bolt securing
idler assembly to frame
www.mymowerparts.com
Figure 5.43
Figure 5.44
Figure 5.45
Auto-Drive CVT Drive System
9. Using a 9/16" wrench on the bottom and a 9/16th
socket on the top, remove the nut and bolt securing
the double idler bracket to the frame.
See Figure 5.43.
NOTE: Support the idler bracket during this procedure.
10. Examine the parts for wear or damage and replace
any damaged parts. See Figure 5.44.
11. Assemble in reverse order of disassembly. (ORDER
OF PARTS) See Figure 5.45.
• Lower idler bracket
• Front pulley hex head screw
• Shoulder spacer
• Front pulley with long shaft down
• Hex spacer
• Shoulder spacer
• upper portion of idler bracket
12. Lubricate and assemble to frame using a 9/16"
socket and wrench.
13. Replace plastic cap in fender.
55