MTD 600 Series Service Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Tractor
  5. 600 Series
  6. Service manual

MTD 600 Series Service Manual

Autodrive
Hide thumbs Also See for 600 Series:
Table of Contents

Advertisement

Quick Links

See also: Shop Manual , Owner's Manual
For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
Service Manual
600 Series Autodrive Tractor
NOTE: These materials are for use by trained technicians experienced in the service and repair of outdoor power equipment of
the kind described in this publication, and are not intended for use by untrained or inexperienced individuals. These materials
are intended to provide supplemental information to assist the trained technician. Untrained or inexperienced individuals should
seek the assistance of an experienced and trained professional. Read, understand, and follow all instructions and use common
sense when working on power equipment. This includes the contents of the product's Operators Manual, supplied with the
equipment. No liability can be accepted for any inaccuracies or omission in this publication, although care has been taken to
make it as complete and accurate as possible at the time of publication. However, due to the variety of outdoor power equipment
and continuing product changes that occur over time, updates will be made to these instructions from time to time. Therefore, it
may be necessary to obtain the latest materials before servicing or repairing a product. The company reserves the right to make
changes at any time to this publication without prior notice and without incurring an obligation to make such changes to
previously published versions. Instructions, photographs and illustrations used in this publication are for reference use only and
may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved
MTD Products LLC - Product Training and Education Department
FORM NUMBER 769-01138
2/2004
www.mymowerparts.com

Advertisement

Table of Contents
loading

Related Manuals for MTD 600 Series

Summary of Contents for MTD 600 Series

  • Page 1 Instructions, photographs and illustrations used in this publication are for reference use only and may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved MTD Products LLC - Product Training and Education Department...
  • Page 2 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 www.mymowerparts.com...

  • Page 3: Steering Adjustments

    For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Step Through Rider Adjustments Steering Adjustments IMPORTANT: The front tires will have a "TOE- 7). From behind the axle, measure the distance hori- IN" between 1/16" and 5/16" to allow the unit to zontally from the inside of the left rim to the track properly.
  • Page 4 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 16). Secure the right hand ball joint to the right hand 18). Install the left hand ball joint using steps 15, 16, axle assembly with the lock washer and nut and 17.
  • Page 5 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive Brake Adjustments IMPORTANT: Make certain the tractor comes to 4). Tighten the hex nut that secures the brake a complete stop when the brake pedal is assembly. depressed. Also, make certain the rear wheels 5).
  • Page 6 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 2). Measure the front blade tips to ground. 6). Locate both lock hex nuts on the front side of the deck stabilizer bracket. See figure 4. 3). Measure the rear blade tips to ground. 4).
  • Page 7 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 2). Measure the outer blade tips to ground. Both 4). Rotate the 3/4" deck adjustment gear right or left measurements taken should be equal. See figure until the deck is level side to side and both blade tips to ground are equal in measurement.
  • Page 8 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive Deck Belt Removal and Installation 42" CUTTING DECK: 1). Lower the deck to the lowest position. 2). Pull the PTO idler pulley and bracket towards the discharge chute, relieving belt tension. See figure 1.
  • Page 9 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 3). Remove the deck belt from the lower pulley on the engine. NOTE: The 46" decks have an upper and a lower belt. The upper belt is removed for cutting deck removal.
  • Page 10 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 2). Remove the battery strap, battery, and the battery tray from the tractor. See figure 2. Upper Drive Belt FIGURE 4. VARIABLE-SPEED BELT REMOVAL AND REINSTALLATION: FIGURE 2. LOWER BELT: IMPORTANT: Prior to lower variable speed belt 3).
  • Page 11 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 2). Raise the variable speed pulley and roll the lower NOTE: During reassembly, make certain the drive belt off. PTO clutch wires are routed inside the right hand drag link.

  • Page 12: Transmission Removal And Installation

    For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive Transmission Removal and Installation NOTE: Prior to performing transmission removal 8). Remove both of the self tapping screws that and installation, it is necessary to remove the secure the transmission to the front torque brack- upper drive belt.
  • Page 13 For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983 Variable Speed Drive 14). Loosen (DO NOT REMOVE) the hex washer 18). Slowly lower the transmission from the tractor. head self-tapping screw that secures the anti- See figure 6. rotation bracket to the brake assembly using 3/8 wrench.

Table of Contents