Advertisement
Built-in Time and Date
Generator
The SVO-1330 is equipped with a built-in time and date
generator, which allows time and date information to be
superimposed onto incoming video signals. This provides a
precise record of the date and time of all incidents. The
time and date generator can also be switched off, allowing
the use of a master time/date generator from a matrix
switcher.
On-screen Display
Function settings such as time/date and timer
programming are menu-controlled. They are easy to set
and check on the monitor screen, and are available in
English, French, and Spanish.
Automatic Daylight Saving Time
By using the menu, the clock of the SV0-1330 can be
adjusted to automatically move forward or back one hour
when time changes occur.
Simultaneous Control of
Multiple VCRs
1. Clock Adjustment
By connecting the CLOCK ADJ IN/OUT terminals of
multiple SVO-1330s, the clocks of all connected units are
adjusted simultaneously. This is especially useful in casino
applications where multiple VCRs are used.
2. Videocassette Eject
By connecting the EJECT IN/OUT terminals of multiple
SVO-1330s, videocassettes from all connected units can be
ejected simultaneously.
3. Remote Control Operation
Up to 50 VCRs can be remotely controlled by the optional
RM-V200 remote control unit via Control S In/Out
connectors. A single VCR can be controlled by the optional
SVT-RM10 remote control unit via the remote jack.
Recording Check
When pressing the play button during recording, the tape
rewinds for about three seconds and then plays back for
about two seconds. The unit then returns to its original
recording mode. This allows the user to quickly check
recording integrity. Also, in the unlikely event that the
recording has not been made, due to a head clog for
example, the SVO-1330 outputs a pulse signal via the
warning out terminal on the rear panel.
Power Failure Protection
A built-in lithium battery provides protection against
power outages, retaining important information including
tape speed, current time and menu setting in memory for
up to 30 days.
Used Time Display
The usage hours of the video head drum can be displayed
on the monitor screen for easy maintenance scheduling.
Tape End/Tape Before-end Warning
To minimize disruption to the recording process during
tape changes, the SVT-1330 provides a tape end or tape
before-end warning buzzer. This buzzer can be disabled if
silent operation is desired.
Warning Signal Output
If recording stops due to a tape jam or an improper video
signal level is detected by either the recording check
function or APC II, a pulse signal will be output through
the warning out terminal on the rear panel.
Other Features
Frame by Frame Playback (forward only)
Key Inhibit Function
Auto Head Cleaner
Digital Auto Tracking
Buzzer Function
High durability and reliability
Front Panel
Rear Panel
Advertisement
