And Sound Settings; If The Color Of The Picture Is Abnormal; Press Color System Or Adjust The Color Setting Until; The Color Becomes Normal - Sony TRINITRON KV-T25SZ8 Service Manual

Displaying on-screen information
Press DISPLAY/REVEAL.
The program position, local system, and TV settings are
displayed on the screen.
DISPLAY
REVEAL
1
AUTO B/G
STANDARD
Setting the Wake Up Timer
You can set the TV to turn on automatically after the
period of time you want.
1
Press WAKE UP/INDEX repeatedly to set the
timer.
The on-screen display appears and the WAKE UP
indicator lights up.
WAKE UP
INDEX
WAKE UP TIMER:10M
After 10 minutes
WAKE UP TIMER:OFF WAKE UP TIMER:12H00M
No wake up timer After 12 hours
2
If you want a particular TV program or
video input to be displayed using the Wake
Up Timer, select the TV program or video
mode.
3
Press POWER on the remote commander or
set the Sleep Timer to turn off the TV in
standby mode.
To cancel the Wake Up Timer, press WAKE UP/INDEX
repeatedly until "WAKE UP TIMER: OFF" appears, or
turn off the main power of the TV.
Notes
The Wake Up Timer starts immediately after the on-screen
display disappears.
8 Operations
The last TV program position or video mode just before the TV
turns into standby mode will appear when the TV is turned on
using the Wake Up Timer.
If no buttons or controls are pressed for more than two hours
after the TV is turned on using the Wake Up Timer, the TV
automatically turns into standby mode. When you want to
continue watching the TV, press any button or control on the
TV or remote commander.
Setting the Sleep Timer
You can set the TV to turn off automatically after the
period of time you want.
Press SLEEP.
SLEEP
SLEEP TIMER:30M SLEEP TIMER:60M
After 60 minutes
After 30 minutes
SLEEP TIMER:OFF SLEEP TIMER:90M
No sleep timer After 90 minutes
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP TIMER: OFF" appears, or turn the TV off.
Changing the on-screen display
language
If you prefer Chinese to English, you can change the
on-screen display language. You can use buttons on the
remote commander or the TV.
+ or -
SELECT
1
Press SELECT until the screen appears as
follows:
SELECT
LANGUAGE / »y¤¥ : ENGLISH LANGUAGE : ENGLISH
2
Press + or – to select " ⁄⁄⁄ ".
LANGUAGE :
»y¤¥ / LANGUAGE : ⁄⁄⁄
Note
You can also use VOLUME +/– on the TV to select the
on-screen display language.
Adjusting the picture
and sound
+ or –
SELECT
PIC MODE
Selecting the picture mode
Press PIC MODE until the mode you want
appears.
PIC MODE
Each time you press PIC MODE, the screen changes as
follows:
Soft picture
High contrast (good for
picture video games)
DYNAMIC SOFT STANDARD
Note
If you change the picture mode after the following
adjustments, the adjustment changes in accordance with the
picture mode.
Adjusting the picture and sound
settings
1
Press SELECT until the item you want to
adjust appears.
SELECT
Each time you press SELECT, the screen changes as
follows:
PICTURE COLOR BRIGHT
(Operative for
NTSC signal only)
HUE
TILT CORRECTION
SHARPNESS
SURROUND
BALANCE TREBLE
BASS
2
Press + or – to adjust the item.
3
To adjust other items, repeat steps 1 and 2.
Note
You can also use VOLUME +/– on the TV to adjust the picture

and sound settings.

If the color of the picture is abnormal

Press COLOR SYSTEM or adjust the color setting until

the color becomes normal.

Note

Normally set COLOR SYSTEM to AUTO.

Front of TV
COLOR SYSTEM SELECT TV SYSTEM
MANUAL PROGR AUTO PROGR
Note

TV SYSTEM button is not used for this model.

9
Operations