Setting Current Day And Time - Honeywell t8624d Installation Instructions Manual

Installer Setup
Number (Press
Time
Select change)
Temperature
display
adjustment.
Furnace Air
Filter Timer.
Humidifier Pad
Monitor.
Ultraviolet Air
Treatment (UV)
System Lamp
Monitor.
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.

Setting Current Day and Time

1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
Set Current Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
T8624D CHRONOTHERM
Table 3. Thermostat Installer Setup Options. (Continued)
Factory Setting
key to
Display
37 0 No difference in
displayed
temperature and
actual room
temperature.
43 2 30 days (System
run time).
44 0 Off
45 0 Off
Set Day/Time
PM
Return Sleep
Mon
System Fan
®
IV DELUXE PROGRAMMABLE MULTISTAGE THERMOSTATS
(Press ! or " key to change)
Description Display
-3 thru +3 1—Display adjusts to 1°F
0, 1, 3, 4
1, 2, 3
1
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
Program
Day
Hold Temp
3. Press Time
played.
NOTE: Tapping the Set Current Day/Time changes the
time in one-hour increments.
Time
M14619
7
Other Choices
Description
higher than actual room
temperature.
2—Display adjusts to 2°F
higher than actual room
temperature.
3—Display adjusts to 3°F
higher than actual room
temperature.
-1—Display adjusts to 1°F
lower than actual room
temperature.
-2—Display adjusts to 2°F
lower than actual room
temperature.
-3—Display adjusts to 3°F
lower than actual room
temperature.
0 – Off
1 – 10 days
3 – 60 days
4 – 120 days
(Time counted when heat,
cool or fan is running.)
1 – 90 days
2 – 180 days
3 – 365 days
(Time counted by calendar
days in heat mode.)
1 – 365 days
(Time counted by calendar
days in any mode.)
Time Set Program
Run Set Current
Wake Leave Return Sleep
Day/Time
Tue
Heat/Cool
Day System Fan
Settings
Daylight
Copy
Time
or Time until the current time is dis-
Time Set Program
Run Set Current
Wake Leave Return Sleep
Day/Time
Program
Tue
Heat/Cool
Hold Temp
Day System Fan
Settings
Daylight
Copy
Time
Actual
Setting
Set Day/Time
PM
M14620
Set Day/Time
AM
M14621
69-1412—1