When Replacing The Main Pcb; Service Position - Panasonic Lumix DMC-FX01PP Service Manual

7.2.

When Replacing the Main PCB

After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-PAVC" web-site in
"TSN system", together with Maintenance software.
7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0363
2 VFK1974
3 VFK1950
4 VFK1951
5 RFKZ0362
6 VFK1541
CAUTION-1. (When servicing FLASH TOP PCB)
1. Be sure to discharge the capacitor on FLASH TOP PCB.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH TOP PCB".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH TOP PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH TOP PCB.
Table S1 Extension Cable List
Connection
FP9001 (MAIN) - LCD UNIT
FP9002 (MAIN) - LCD UNIT
FP9801 (SUB) - CCD UNIT
FP9802 (SUB) - LENS UNIT
PP9001 (MAIN) - PS9801 (SUB)
PP9802 (SUB) - PS8001 (FLASH TOP)
19
Form
19PIN 0.5 FFC
4PIN 0.5 FFC
33PIN 0.3 FFC
39PIN 0.3 FFC
100PIN B to B
40PIN B to B