When Replacing The Main Pcb; Service Position - Panasonic Lumix DMC-TZ2P Service Manual

7.2.

When Replacing the Main PCB

After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-PAVC" web-site in
"TSN system", together with Maintenance software.
7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 VFK1950
2 RFKZ0416
3 RFKZ0363
4 RFKZ0363
5 RFKZ0363
6 VFK1974
7 RFKZ0362
7.3.1. Extension Cable Connections for DMC-TZ3
Table S1 Extension Cable List
Connection
FP9801 (MAIN) - CCD UNIT
FP9802 (MAIN) - LENS UNIT
FP9803 (SUB) - FP9901 (FLASH)
FP9005 (MAIN) - FP8001 (TOP OPERATION)
FP9001 (MAIN) - LCD UNIT (For DMC-TZ3)
FP9002 (MAIN) - LCD UNIT (For DMC-TZ2)
FP9003 (MAIN) - LCD UNIT (For DMC-TZ3)
FP9004 (MAIN) - LCD UNIT (For DMC-TZ2)
PS9801 (SUB) - PP9001 (MAIN)
20
Form
33PIN 0.3 FFC
41PIN 0.3 FFC
19PIN 0.5 FFC
19PIN 0.5 FFC
19PIN 0.5 FFC
4PIN 0.5 FFC
100PIN B to B