Controls - Kenwood KAF-1010 Service Manual

Main unit
KAF-3010R KAF-1010
3
ON/STANDBY
POWER
ON OFF
1 2 4
ON/STANDBY
POWER
ON OFF
PHONES A
!
1 POWER switch (KAF-3010R)
Usually leave this switch to the on position.
When the unit is not to be used for a long period of time, set
the switch to the OFF position for safety.
2 ON/STANDBY key (KAF-3010R)
This key effective when the POWER key is set
to the on (standby) position, and pressing this key
turns power ON and off (standby).
3 Standby indicator (KAF-3010R)
4 POWER switch (KAF-1010)
5 BASS knob
To adjust low frequencies.
6 TREBLE knob
To adjust high frequencies.
7 INPUT indicator
An indicator lights for the source selected
with the INPUT SELECTOR knob.
8 VOLUME CONTROL knob
Adjust the volume.
About the standby indicator (KAF-3010R only)
This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve the
memory. This is called the Standby mode. When the Standby indicator is lit, the amplifier can be switched ON / STANDBY from the remote
control.

CONTROLS

5 5
POWER
ON OFF
5 6
CD
SPEAKER B BASS TREBLE
@
KAF-1010/3010R
7 8
VOLUME CONTROL
PHONO TUNER TAPE MD
MIN
INPUT SELECTOR
BALANCE MUTING
thermally reactive advanced instantaneous transistor
L R
# $ %
9 SOURCE DIRECT indicator
Usually leave this switch to the on (standby) position.
0 SOURCE DIRECT key
To listen to a source with high quality sound.
! PHONES jack
Used for headphone listening.
@ SPEAKERS A/B switches
Press to select the A and/or B speaker systems.
# BALANCE knob
Adjust the volume balance between left and right.
$ INPUT SELECTOR knob
Turn to select the input sources.
% MUTING key/indicator
Mute the sound temporarily.
^ LOUDNESS key/indicator
Use to emphasize deep bass sounds.
& Remote sensor(KAF-3010 ONLY)
9 0
SOURCE DIRECT
MAX
LOUDNESS
T R A I T
^ &
3