Removing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Remove the
3
Follow the procedure from step 1 to step 3 in "Removing the
4
Remove the keyboard.
5
Follow the procedure from step 1 to step 7 in "Removing the
Procedure
1
Release the tab that secures the I/O board to the computer base and turn
the I/O board over.
2
Lift the connector latch and using the pull tab, disconnect the I/O-board
cable from the I/O board.
52
base
cover.
Computer. After working inside your
After Working Inside Your
Hard
Drive".
Palm
Rest".