Removing The Power-Button Module; Prerequisites; Procedure - Dell Inspiron 15–3541 Owner's Manual

Removing the Power-Button
Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in "Removing the
4 Remove the keyboard.
5 Follow the procedure from step 1 to step 7 in "Removing the

Procedure

1 Peel off the power-button board cable from the palm rest.
2 Turn the palm rest over and place it on a clean and flat surface.
3 Remove the power-button board cable through the slot on the palm rest.
4 Peel off the tape that secures the power-button board to the palm rest.
5 Remove the screw that secures the power-button board to the palm rest.
6 Note the power-button board cable routing and peel it off the palm rest.
42
base cover.
Computer. After working inside your
After Working Inside Your
Hard Drive".
Palm Rest".