Denon AVR-1709 Owner's Manual page 67

[Remote Control Unit]
.Cauu
SymptOJn
Set does not work • Batteries are worn.
properly when • You are operating outside of the
remote control specified range.
unit operated. • Obstacle between main unit and
remote control unit.
• The batteries are not inserted in
. the proper direction, as indicated
by the polarity marks in the
battery compartment.
• The set's remote control sensor
is exposed to strong light (direct
sunlight. inverter type fluorescent
bulb light, etc.).
• The remote 10 of the main unit
and remote control unit do not
, match.
SOURCE CONTROL
• The
are not set in the
positions.
CoUntermeasure
• Replace with new batteries.
• Operate within the specified
range.
• Remove the obstacle.
• Insert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
• Move the set to a place in which
the remote control sensor will
not be exposed to strong light.
• Set "Remote 10" for the main
unit to "1 ':
SOURCE CONTROL
• Set the
switches
correct switches to the correct positions
according the operation you are
applying.
[Audio)
Page Symptom
No sound is • You are
3
produced from source (TV, AM radio broadcast,
3
etc.) in the "STANDARD" (Dolby/
center speaker.
DTS Surround) mode.
3
No sound • The surround mode is set to • Set to a surround
3
is produced "STEREO" or "DIRECT':
from surround
speakers.
No sound is ·The surround back speaker's • Check the setting and change it
3
produced from power amplifier is assigned to a
surround back different channel.
speaker. • Surround back speaker setting is • Set to something other than
set to "None':
30
·The " Parameter"
Parameter" -
settings are "OFF':
40,42,43,
47 - 49
• Surround mode not set to a mode • Select
for 6.1- or 7.1-channel playback.
No sound is • Subwoofer's power not turned • Turn on the subwoofer's power.
produced from on.
subwoofer. ·The
"Speaker Setup" is set to "No':
• The subwoofer is not properly • Check the connections.
connected.
·The
turned off.
No test tones are
• Surround
"STAN DARD" (Dolby/DTS
produced when
Surround).
main remote
control unit's
TEST button is
pressed.
DTS sound is not • DVD player's audio output setting • Set the DVD player. For details,
output. is not set to bitstream.
·DVD player is not compatible • Use a DTS-compatible player.
with DTS sound playback.
• The AVR-1709's "Input Mode" • Set to the "Auto" or "DTS"
setting is set to other than
"DTS':
CMJse
Couirtenn...ure
" .-;..
playing a monaural • The mode is set to something
other than "STANDARD" (Dolby/
DTS Surround).
mode.
as necessa ry.
"None':
- "Surround • Please set
"SB CH OUT" "Surround Parameter" -
CH OUT" to settings other than
"OW:
a
mode.
"Subwoofer" setting
at • Set to "Yes ':
subwoofer's volume is • Adjust the subwoofer's volume
to an appropriate level.
mode not set to • Set to the "STANDARD"(Dolby/
DTS Surround) mode.
refer to the
operating instructions.
mode.
ENGLISH
.,
Page
31
playback 32
28
23
" Parameter" - 35
"SB
jJ
' "
3
...
o
' "
surround playback 31,32
n
o
~
- ,
£
r--
s
23
c
~
N
o
9
:l
'"
45
31
-
DVD player's
-
39
64