LG LS-P0760CL Service Manual page 45

• Unhook the tab on the left inside edge of the
chassis by pressing it outwards and at the same
time, slightly pull the evaporator until the tab is
clear of the end-plate.
• Remove the evaporator from the chassis
carefully.
• Unhook the tab on the right inside of the chassis
at the same time, slightly pull the evaporator
toward you until the tab is clear of the slot.
5. To remove the Cross-Flow Fan.
• Loosen the screw securing the cross-flow fan to
the fan motor (do not remove).
• Pull the left end of the cros-flow fan with the self-
aligning bearing out the groove.
• Remove the cross-flow fan by sliding it out from
the shaft of fan motor.
6. To remove the Fan Motor.
• Pick it up from the groove. (Do not remove a
black rubber as a spacer).
Tab
End Plate
evaporator
Pull
Evaporator
Cross-flow fan
Bearing
ƒ¡ 45ƒ¡
Pull
Evaporator
Tab
Fan motor
Screw
Cross-flow fan