Sony PFM-500A3WE Service Manual page 36

7
English
7
Store the retractable feet.
For details on using the retractable feet, see the
Operating Instructions for the Sony flat panel
monitor.
8
Install the flat monitor with the mounting bracket (b)
on the wall bracket (a).
Hook two mounting bracket shafts A, B on the
wall bracket grooves.
Note
Make sure that the shafts hook properly into the
grooves.
8
(b)
A
(a)
B
Installation
9
(2)
(d)
English
9
Lock the mounting bracket shafts (hooked in Step
8) by turning two knobs (d) so that the shafts do
not move vertically.
Pull the handle (c) out (installed in Step 6) and
unsnap the lock. Pull down the monitor panel so
the mounting bracket angle is fully extended. Turn
two knobs (d) and lock the monitor panel.
10
Adjust the monitor panel angle.
You can change the angle from 0 to 20 (7
levels). (Approx. 0 , 4 , 8 , 12 , 15 , 18 and 20 )
(1) Pull the handle (c) down to unsnap the lock.
(2) Push the panel to the desired angle.
(3) Let go of the handle and adjust the panel angle
so it can be locked.
See the angle marks.
9 10
!º
0
4
8
12
(3)
15
18
(2)
20
(1)
(c)
(1)
(c)