Download Print this page
Revo RCDY24-1 Instruction Manual

Revo RCDY24-1 Instruction Manual

Dome camera with ir night vision

Advertisement

Quick Links

Dome Camera

with IR Night Vision
Instruction Manual
VER.:1.0, NO.: R040687/2

Advertisement

loading
Need help?

Need help?

Do you have a question about the RCDY24-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Revo RCDY24-1

  • Page 1: Dome Camera

    Dome Camera with IR Night Vision Instruction Manual VER.:1.0, NO.: R040687/2...
  • Page 2 Thank you for purchasing our product. Before installing this camera, please read this instruction manual carefully to ensure proper use. 1. Safety Precautious CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE.
  • Page 3 3. Feature  Color camera PCB module with 1/3” High Resolution Sensor.  Employs Digital Signal Processor (DSP) chip-set for image control.  Pixel number: NTSC=380K / PAL=440K.  High sensitivity, low smear, high anti-blooming and high S/N ratio.  Support functions: Auto Electronic Shutter (AES), Auto Iris (AI), Auto Gain Control (AGC), Auto White Balance (ATW), Back Light Compensation (BLC), Flickerless mode (FL).
  • Page 4 5. Installation & Operation Install Preparation Drill hole in wall if wire needs to go through the wall. Note! The following picture illustrates the base of the real IR Dome. The IR Dome does not provide a central pathway for the cables to run through applies RJ12 connection...
  • Page 5 3. Wiring Instructions Connect the video output to the monitor or other video device through a 75 Ohms type coaxial cable and RJ-12 output to the power source. RJ-12 4. Install Camera Use the 4 screws provided to attach the camera and bracket to the ceiling surface or wall.
  • Page 6 5. Camera Diagram Image Adjustment  You can adjust camera to any direction by using Pan, Tilt, and Rotate mechanism.  Pan Base moves by 120° on the whole.  Tilt Base covers total 120° angle (60° to each side). ...
  • Page 7: Specification

    6. Specification According to the camera purchased, select and refer to the appropriate specification below: RCDY24-1 RCDY12-1 Model No. 1/3“ Color CCD Image Device (Sharp Chipset) NTSC: 510 x 492 Picture Elements PAL: 500 x 582 Resolution 540 TVL 0.02Lux/ F1.2 (Day) Min.

This manual is also suitable for:

Rcdy12-1