Review the following checklist of items before you begin setup. The following items are needed for a successful 802.11n wireless
deployment using the SonicPoint-N Dual-Band appliance:
•
A SonicWALL SonicPoint-N Dual-Band appliance
•
SonicOS Enhanced 5.2 or higher, installed on one of the following SonicWALL UTM appliances:
•
TZ 210 series
•
NSA series
•
E-Class NSA series
•
An 802.3af compliant PoE injector or PoE-capable switch
•
An active Internet connection
•
A configured interface on the SonicWALL security appliance set to a zone type of "wireless"
•
A location selected for placement of your SonicPoint such as a wall or ceiling
•
Clients capable of 802.11n wireless communications
1. Although clients with 802.11a/b/g hardware are supported, the presence of these legacy clients within range of your network may affect the connection