Iob Dip Switch Settings (Sw101) - Ricoh A-C4 Service Manual

PRINTED CIRCUIT BOARDS

IOB DIP Switch Settings (SW101)

1. The position of SW 1 determines the engine speed. This switch should be UP
(ON) for the B195/B264 (35 cpm) or DOWN (OFF) for the B198/B265 (45 cpm)
NOTE: Move a switch UP to ON or DOWN to OFF.
2. SW 2, 3, 4, and 5 should all be DOWN (OFF). Do not change these settings.
This information is only for reference:
SW
2 Switches off jam detection.
3 Engine program recovery.
4 Print output for debugging.
5 Switches off SC detection.
3. SW 6, 7, 8 should be set for the area where the machine is used and serviced.
6 7
OFF OFF
ON OFF
OFF ON
OFF OFF
ON OFF
ON ON
OFF ON
ON ON
ON: Up
OFF: Down
If set to ON
8 Location
OFF Japan
OFF North America
OFF Europe
ON China
ON Taiwan
OFF Asia
ON Korea
ON Not used
3-88
20 June 2005