Sony DCR-PC2E Service Manual page 47

NOTE: Follow the disassembly procedure in the numerical order given.
2-1. LCD UNIT, PD-112 BOARD
REMOVING THE PD-112 BOARD
4 Back light
Cold cathode
3 Remove the
fluorescent tube
three solderings
8 Inverter
transformer unit
9 PD-112 board
2 LCD unit
(24P)
1 Touch panel
(TP-4750)
(5P)
5 PCB clip
9 Panel spacer
7 Panel protection sheet
[LCD SERVICE POSITION (Mainly for voltage measurement and check)]
Touch panel (TP-4750)
Base (Use box or the like.)
LCD unit
2 LCD cabinet (R)
assembly
7 Remove the
six solderings
6 PCB clip
!£ Two claws
Adjustment remote
commander (RM-95)
PT-124 harness (13P)
TP-112 harness (8P)
Back light
Cold cathode
fluorescent tube
1 Two screws (M1.7
lock ace, p2
!™ Screw (M1.7
A
lock ace, p2
5 TP-112 harness
(8P)
4 PT-124 harness
(13P)
!∞ PD-112 board/
Inverter transformer unit
6 Two screws (M1.7
lock ace, p2
!¢ Back light
Cold cathode
fluorescent tube
!¡ LCD unit
!º Touch panel (TP-4750)
3 Two screws (M1.7
A
lock ace, p2
B
8 LCD cabinet (L)
assembly
LANC
jack
DK-115
PD-112 board/
Inverter transformer unit
2-2
2.5),
2.5),
B
2.5),
2.5),
AC adaptor
(4.2Vdc)
AC IN
(AC-VF10)
(AC-VQ11)