Sony KE-42M1 Service Manual page 107

Button Description
Press to select the video equipment
0 Input Select
connected to the TV's video inputs.
Buttons
TV: Press to select the TV to watch the
TV programs.
VIDEO 1/2/3: Press repeatedly to cycle
through the video equipment connected
to the VIDEO 1 IN, the VIDEO 2 IN
and the VIDEO 3 IN.
If the video label is selected as "Skip,"
the selected input will be skipped from
the cycle.
VIDEO 4: Press to select the video
equipment connected to the HD/DVD 4
IN.
VIDEO 5: Press to select the video
equipment connected to the HDMI 5
IN.
qa VOL +/– Press to adjust the volume.
Press to reset the settings to the factory
qs RESET
defaults. See pages 60 and 62. Also
used to clear Channel Label.
Press to turn off the TV screen. For
qd PIC OFF
details, see "Using the Picture off
Function" on page 48.
Press to turn on and off the TV.
qf POWER
Press once to display the current
qg DISPLAY
channel number/channel label and the
Wide Screen Mode or the current video
input number/video label and the Wide
Screen Mode. When the display is
turned on, the current channel number/
channel label or video input number/
video label remains displayed.
Press it again to turn the display off. If
set, the current channel number will
display for 10 seconds.
Press repeatedly until the TV displays
qh SLEEP
the time in minutes (15, 30, 45, 60 or
90) that you want the TV to remain on
before shutting off. To cancel Sleep
Timer, press SLEEP repeatedly until
Sleep Off appears.
Press 0 - 9 to select a channel; the
qj 0 - 9 ENT
channel changes after 2 seconds. Press
ENT to change channels immediately.
qk MENU Press to display the menu. Press again
to exit from the menu. For details, see
page 38.
Press V/v/B/b to move the on-screen
ql V/v/B/b
cursor. To select an item, press
Press to select the function of your
w; F1
video equipment which is programmed
on the TV's remote control.
Press to select the function of your
wa F2
video equipment which is programmed
on the TV's remote control.
ws CH +/– Press to scan through channels. To scan
quickly through channels, press and
hold down either CH.
Button
wd
When FUNCTION is switched on SAT/CABLE
TV/SAT
wf MTS/SAP
When FUNCTION is switched on SAT/CABLE
GUIDE
.
Description
Press to select the sound effect modes:
TruSurround, Off. The sound effect
modes can be also accessed in the
Audio menu. For more details, see
"Selecting the Effect Mode" on page
43.
Press to switch between the TV and the
satellite receiver.
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
"Selecting Stereo or Bilingual
Programs" on page 63.
Press to display the program guide of
your satellite program provider.
13