Md Mechanism Deck; Slider (Cam) - Sony HCD-J3MD Service Manual

3-12. MD MECHANISM DECK

3 MD mechanism deck

3-13. SLIDER (CAM)

6 Slider (CAM)
2 Bracket (GUIDE L)
1 Two screws
(BTP 2.6x6)
3 Leaf spring
When attaching the slider (cam),
this part of the over write head should
be inside arrow A.
26
1 Two Step screws
(BVTPWH M3)
5 Flat type wire
(21 core)
7 Bracket (MDM)
A
5 Bracket (GUIDE R)
2 Two Step screws
(BVTPWH M3)
4 Connector (7P)
6 Flat type wire
(23 core)
• Note for installation of Slider (CAM)
Set the shaft of Cam gear to
be at the position in the figure.
Set the shaft of Lever (O/C) to
be at the position in the figure.
4 Two screws
(BTP 2.6x6)