Step 9. Operating Your Thermostat - Honeywell CT3611 Owner's Manual

q Press to accept the change.
Copy
q Repeat these steps for each day you want to copy.
NOTE: donE appears for two seconds and then the normal program display appears.
Clear a Program Period
NOTE: Wake cannot be cleared.
q Press ,
Leave
Return
q Press until the desired day displays.
Day
q Press and hold the
q Repeat the above steps for each period to be cleared.
Run
q Press .
Program

STEP 9. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)
q Press or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis-
played. Temporary appears in the display. The setting cancels when the next program period starts or when
you press
Program
, or for the program period you want to clear.
Sleep
, , or
Leave Return Sleep
Run
.
for approximately 3 seconds until the time and temperature clear.
15
M13329
69-1081—3