Goodman SSX16 Product Specifications page 3

S
pECifiCationS
Cooling Capacity
Nominal Cooling (BTU/h)
Decibels
Compressor
RLA
LRA
Condenser Fan Motor
Horsepower (RPM)
FLA
Refrigeration System
Refrigerant Line Size¹
Liquid Line Size ("O.D.)
Suction Line Size ("O.D.)
Refrigerant Connection Size
Liquid Valve Size ("O.D.)
Suction Valve Size ("O.D.)
Valve Connection Type
Refrigerant Charge
Electrical Data
Voltage-Phase
Minimum Circuit Ampacity ²
Max. Overcurrent Protection ³
Min / Max Volts
Electrical Conduit Size
Ship Weight (lbs)
¹ Tested and rated in accordance with ARI Standard 210/240
² Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
³ Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
Notes
• Always check the S&R plate for electrical data on the unit being installed.
• Installer will need to supply ⅞" to 1⅛" adapters for suction line connections.
• Unit is charged with refrigerant for 15' of ⅜" liquid line. System charge must be adjusted per Installation Instructions Final Charge Procedure.
• Installation of these units requires the specified TXV Kit to be installed on the indoor coil. THE SPECIFIED TXV IS DETERMINED BY THE OUTDOOR UNIT NOT
THE INDOOR COIL.
SS-SSX16
SSX16 SSX16
0241B* 0301A*
24,000 30,000
73.5 73.5
13.5 12.8
58.3 64
1/6 1/6
1.10 1.10
⅜" ⅜"
¾" ¾"
⅜" ⅜"
¾" ¾"
Sweat Sweat
97 96
208/230-1 208/230-1
18.0 17.1
30 25
197/253 197/253
½" or ¾" ½" or ¾"
173 174
www.goodmanmfg.com
SSX16 SSX16
0361B* 0421A*
36,000 42,000
73.5 75
14.1 16.7
77 79
1/6 1/4
1.10 1.50
⅜" ⅜"
⅞" 1⅛"
⅜" ⅜"
¾" ⅞"
Sweat sweat
102 109
208/230-1 208/230-1
18.7 22.4
30 35
197/253 197/253
½" or ¾" ½" or ¾"
182 185
p S
rodUCt pECifiCationS
SSX16 SSX16
0481B* 0591A*
48,000 60,000
74 73.5
19.9 25.0
109 134
1/4 1/4
1.50 1.50
⅜" ⅜"
1⅛" 1⅛"
⅜" ⅜"
⅞" ⅞"
Sweat Sweat
138 251
208/230-1 208/230-1
26.4 32.8
45 50
197/253 197/253
½" or ¾" ½" or ¾"
236 287
3