Aiwa TV-F2400 Service Manual page 2

NOTE ON BEFORE REPAIRING
• Do not turn on the power without degaussing coil when repairing.
• In case of removing degaussing coil when repairing, connect dummy as follows;
Method 1 : Use another new degaussing coil and connect it when repairing.
Method 2 : Place the 6.8 - 2.0W resistor to the degaussing coil connector and connect it
as service jig.
• Cement resistor R848 ,which is parallel to the degaussing coil, is opened when the power is turned
on without the degaussing coil or dummy resistor.
– 2 –