Step 7. Mount Thermostat Mounting Plate - Honeywell CT2095 Owner's Manual

Step 7. Mount Thermostat
Mounting Plate
Position mounting plate on wall. Use level to
make sure mounting plate is level. Use a
pencil to mark the two mounting holes.
Remove mounting plate from wall, and drill
3/16-inch holes in wall (if drywall) as marked.
For firmer material such as plaster or wood,
drill 7/32-inch holes. Gently tap anchors
(provided) into drilled holes until flush with the
wall.
Reposition mounting plate over holes,
pulling wires through wiring opening.
Loosely insert two mounting screws into
holes.
WIRES THROUGH
WALL OPENING
WALL
21
WALL ANCHORS (2)
MOUNTING
PLATE
MOUNTING
SCREWS (2)
M1718
69-1385