Honeywell CT2095 Owner's Manual page 12

Set one schedule for weekdays and another for
weekends because your requirements are
usually different for each. Also, during week-
ends, only the WAKE and SLEEP time periods
are available.
Fill in the times and temperatures you desire for
weekdays and weekends. If you decide not to
program the thermostat, it automatically con-
trols heating at 68°F (20°C), and cooling at 78°F
(26°C), 24 hours a day. Also, you do not need to
enter a time and temperature program for all
periods if your schedule does not require it. For
example, a house that is occupied during week-
days would require programs only for WAKE
and SLEEP.
If no program is entered for the weekends, the
thermostat operates on the weekday SLEEP
program all weekend.
Before programming, remove the clear plastic
overlay covering the display.
When pressing the keys, use the ball of your
finger or a soft pencil eraser. Using sharp finger-
nails or pencil points can damage the keypad.
If you make an error at any time during program-
ming, just press the Run Program key, and
continue again at the previous step in your
sequence.
12 69-1385