Heating Program - Honeywell CT2095 Owner's Manual

NOTE: Batteries are required for operation and programming. When inserting batteries, set the
System switch to Off. Remove the battery door (on the thermostat left side) using a coin at
the bottom. Follow instructions in Step 3. Also see the label inside the battery cover for
abbreviated programming procedures for your thermostat.
Set Current Time/Day
To set time, press and release
Clock/Day
release again, press

Heating Program

With System switch at Heat, press and release
SET appear on display.
Time
Use to program WAKE time and
Repeat sequence for LEAVE, RETURN, SLEEP.
Clock/Day
once, press
Time
until current day shows; then press
TEMP
to program WAKE temperature for MON FRI (Monday-Friday).
Time
until current shows. To set day, press and
Run Program
Weekday
once. WAKE, MON FRI (Monday-Friday), and
15
.
69-1385