Table of Contents
Advertisement
CBA750B | USER MANUAL Firmware version 4.2
CRADLEPOINT
Source Netmask: 255.255.255.0
•
Failover: (Default: Selected.) When this is selected and traffic from the chosen WAN device for this rule is interrupted, the
router will fail over to another available WAN device. Deselect this option to restrict this traffic to only the selected WAN
interface.
WAN Binding Type: You have several options for specifying the type of WAN interface(s) you want associated with your
rule. Designate the interface(s) by Port, Manufacturer, Model, Type, Serial Number, MAC Address, or Unique ID. This
selection will create a dropdown list of options to complete a sentence with the following form: "When ____ is ____," such
as, "When Type is LTE." You also have the option to replace "is" with "isn't," "starts with," "ends with," or "contains."
• Port: Select from the dropdown list of possible WAN ports on the router.
o USB 1
o USB 2
o ExpressPort
• Manufacturer: Select from a dropdown list of attached devices.
• Model: Select from a dropdown list of attached devices.
• Type: Select from the dropdown list of possible WAN types.
o WiMAX
o Modem
o LTE
• Serial Number: Select from a dropdown list of attached devices.
• MAC Address: Select from a dropdown list of attached devices.
• Unique ID: Select from a dropdown list of attached devices.
Load Balance Algorithm: Select the Load Balance Algorithm for this WAN Affinity rule from the following dropdown
options:
• Round-Robin: Evenly distribute each session to the available WAN connections.
• Rate: Distribute load based on the current upload and download rates. A WAN device's upload and download
bandwidth values can be set in Internet ! Connection Manager.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 103
Advertisement
Table of Contents
