PS6U1UHE USB-Host Ethernet Adapter User Guide CradlePoint, Inc. 1199 Shoreline Ln, Suite #301 Boise, ID 83702, USA Phone: (208) 424-5054 Fax: (208) 429-6852 www.cradlepoint.com...
Contents ONTENTS ... 1 NTRODUCTION ... 2 ETTING TARTED Before You Begin ... 2 Connecting to the PS6U1UHE ... 2 Setting up the MC1000 ... 2 Installing eConnect™ on the MC1000... 2 Connecting the MC1000 to the PS6U1UHE ... 6 Connecting the PS6U1UHE to your Network ...
Introduction The CradlePoint PS6U1UHE serves as an essential data communications device, enabling you to synchronize the information on your Symbol® MC1000 and a host computer across a standard Ethernet network. There are 3 connection ports on the PS6U1UHE. These are described below: Ports 5VDC 1A A standard barrel port used for connecting the included Power Adapter.
Getting Started Before You Begin Before you can successfully connect your Symbol MC1000 to your network with your PS6U1UHE, you must have successfully configured your device for ActiveSync operations. For assistance with ActiveSync operations, please refer to your Symbol Integrator Guide. Only after you have successfully created an ActiveSync partnership between your MC1000 and your host computer, and completed an ActiveSync operation, should you attempt to connect your device to your network.
Page 6
Step 2 – Verify MC1000 Configuration Before you start to install the MC1000 driver software, you must ensure you have successfully completed an ActiveSync between the MC1000 and your computer via the MC1000’s USB cable. If you have not already configured ActiveSync, please do so now and ensure that you can successfully synchronize between the MC1000 and your PC before you continue.
Page 7
After the CAB file installation completes, you will need to warm boot the MC1000 by pressing and holding the red ON/OFF button until the device resets. This process will add eConnect to your Applications Folder. Consult your MC1000 documentation if you need help with performing a warm boot. Be careful when performing a “warm boot”...
Page 8
If Establish TCP/IP Connection is also checked, the application is run after the conn Tapping Browse displays the Select Application dialog. If necessary, you can browse for the application and enter an parameters. Pressing OK accepts the entries and returns to the ori the new entries displayed.
Connecting the MC1000 to the PS6U1UHE Setting up your PS6U1UHE is easy and includes only these simple steps. CradlePoint USB-Host to Ethernet Adapter User Guide 1. Connect the Power Supply (PN 170140-000) shown below 2. Connect the MC1000 to the PS6U1UHE Mini-A to Mini-B Cable (PN 170373-000), as shown below.
Connecting the PS6U1UHE to your Network Completing the setup of the PS6U1UHE to your network is as simple as: 1. Connect one end of a standard RJ45 Ethernet cable to the PS6U1UHE, as shown below. 2. Connect the other end of the cable to an open port on your network’s hub, switch, or router, as shown below.
When You Can’t Use DHCP For most installations, it is not necessary to manually configure the USB-Host to Ethernet Adapter. The PS6U1UHE uses DHCP to automatically configure its network settings by default. For installations on networks that do not have a DHCP server or must use static IP addresses for other reasons, it is possible to customize the Adapter's configuration (e.g.
Product/Technical Support CradlePoint is committed to providing its customers with first-class customer service and technical support. For your convenience, a few troubleshooting techniques are provided below that might help you fix your problem quickly and easily. If you have a different issue, or if you have tried these and they didn’t resolve your problem, please feel free to contact Technical Support at: CradlePoint, Inc.
Symptom: It won’t ActiveSync! Possible Cause ActiveSync partnership between host computer and your MC1000 is not correctly established PS6U1UHE not configured for DHCP Cannot find DHCP/WINS server(s) Missing, or improperly configured, software drivers Won’t automatically ActiveSync when inserted into the cradle Network problems Other ActiveSync Problems If you require more information on the ActiveSync process, please refer to the ActiveSync...
Appendix A – Regulatory Information Radio Frequency Interference Requirement FCC Statement the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
Appendix B – Warranty CradlePoint, Inc. warrants this product against defects in materials and workmanship to t he original purchaser (or the first purchaser in the case of an authorized reseller) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product.
Page 16
CradlePoint USB-Host to Ethernet Adapter User Guide CradlePoint, Inc. 1199 Shoreline Ln, Suite #301, Boise, ID 83702 Phone (208) 424-5054 • Fax (208) 429-6852 Email: support@cradlepoint.com • www.cradlepoint.com Part Number 190130-001 Rev A CradlePoint, Inc...
Need help?
Do you have a question about the USB-Host to Ethernet Adapter PS6U1UHE and is the answer not in the manual?
Questions and answers