Using The Memory Function; Averaging Function - Omron HEM-650 Instruction Manual

HEM-650_E_SP_q6.qxp

USING THE MEMORY FUNCTION

The monitor automatically stores up to 90 sets of measurement values
with date and time in the memory. When 90 sets of measurement values
are stored, the oldest record is deleted to save the most recent values.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most recent
sets of measurement values taken within 10 minutes of the most recent
reading.
NOTE: If only two sets of measurement values are stored in the memory
for the 10 minute period, the average is based on the two sets of
measurement values. If only one set of measurement values is
stored, this is displayed as the average.
6/25/07 7:19 PM Page 27
27