Usb Wake-Up - Supermicro MBD-X8STI-F User Manual

X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual

USB Wake-Up

Use JPUSB jumpers (JPUSB1/JPUSB2/
JPUSB3) to "wake-up" your system by pressing
a key on a USB keyboard or clicking the USB
mouse of your system. The JPUSB jumpers
are used together with the USB Wake-Up fea-
ture in the BIOS. Enable these USB jumpers
and the USB feature in the BIOS to wake-up
your system via USB devices. See the table
on the right for jumper settings and jumper
connections.
Note: JPUSB1 is used for Backpanel USB
ports #0/1, JPUSB2 is for Front Panel
USB ports #2/3, and #4/5. JPUSB3 is
used for Front Accessible USB Ports 6
and 7. When the USB function is set to
Enabled in the BIOS, and a USB Wake-up
jumper is set to Disabled, be sure to re-
move the USB devices from the USB ports
whose USB jumper is Disabled before the
system goes into the standby mode.
A
B
JPUSB1 (BackPanel USB
1-2
2-3
JPUSB2 (Front Panel USB
2/3, 4/5 Wake-up Enable)
1-2
2-3
JPUSB3 (Front Panel USB
1-2
2-3
LSI 1068E
C
2-32
0/1 Wake-up Enable)
Enabled (Default)
Disabled
Enabled
Disabled (Default)
6, 7 Wake-up Enable)
Enabled
Disabled (Default)
A. BP USB 0/1 Wake-up
B. FP USB 2/3, 4/5 Wake-up
C. FP USB 6, 7 Wake-up