Supermicro MBD-X8STI-F User Manual page 13

X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual
X8STi/X8STi-F/X8STi-3F/X8STi-LN4 Quick Reference
X8STi/X8STi-F/X8STi-3F/X8STi-LN4 Jumpers
Jumper Description
JBMC1 BMC Jumper (X8STi-F/-3F Only)
JBT1 CMOS Clear
2 2
JI C1/JI C2 SMB to PCI Slots
JPG1 Onboard VGA Enable
JPL1/JPL2 LAN 1/2 Enable
JPL3/JPL4 LAN 3/4 Enable (X8STi-LN4)
JPS1 SAS Enable (X8STi-3F)
JPS2 SAS RAID Mode Select (X8STi-3F)
Note: JBMC1 is reserved for internal testing only. Do not change the jumper
setting pre-set by the manufacturer.
LSI 1068E
Default Setting
Pins 1-2 (Default) (Note Below)
(See Chpt. 2)
(See Chpt. 2)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Closed (Software RAID)
1-4