Advertisement
ULTRASONIC DISTANCE SENSORS
Accessories
Power supply
24 Vdc regulated power supply
with output relay
The FF-MADB24RB is a small and versatile power
supply usually used with the ultrasonic distance
sensors, but may be used for any purpose. The
power supply accepts 115 or 230 Vac input, is
regulated to 24 Vdc. An internal SPDT relay may
be triggered by NPN or PNP sensor output.
Use with Series:
940, 941, 942, 944, 946, 947
Supply voltage:
110 Vac or 220 to 240 Vac
Circuit protection:
Load current:
LED indication:
Output type: Relay SPDT 4 A/250 Vac, 3 A/60 Vdc
Termination:
Housing:
Housing type:
DIN rail mount, 2 holes Ø4,5 mm
50,0
1.97
60,0
2,36
75,0
62,5
2.95
2.46
6,0
110,0
0.24
4.33
REFERENCE
FF-MADB24RB
124
Due to regional agency approval requirements, some products may not be available in your area. Please
contact your regional Honeywell office regarding your choice of product.
Beam Deflectors
Beam deflectors deflect the ultrasonic beam by 90° with virtually no
signal loss. They are extremely useful in applications where space is
limited; they allow the space required for the dead zone to be
accommodated when setting up the sensor. The focusing beam
deflector concentrates the ultrasonic beam, preventing unwanted
reflection. It reduces the beam angle by approximately half.
The 43192871 series is made of stainless steel and may be used
to fix the sensor. The 66195116-001, made of plastic, is available
for M30 sensors only and cannot be used to fix the sensor.
OPTIONS
Compact - M30
Use with Series:
Housing:
Short circuit
150 mA max.
Output relay
Screw
Plastic
REFERENCE
37,5
66195116-001
1.48
35,0
M30
1.38
4,8
Use with Series:
0.19
Housing:
REFERENCE
43192871-001
Focusing
43192871-002
www.honeywell.com/sensing
M18
Use with Series:
942, 944, 946, 947
Plastic
Housing:
Focusing
940, 942, 944, 946, 947
Stainless steel
940, 942, 944, 946, 947
Stainless steel
REFERENCE
43192871-003
43192871-004
Advertisement
