Download Print this page

Honeywell Switches and Sensors Brochure page 127

Honeywell industrial switches and sensors brochure

Advertisement

M12 Connectors
OPTIONS
WITHOUT CABLES
M12 female, 5 pin, 5 screw terminals
The 66195044-001 is used for the 940, 941, 944,
947 series but may be used for any industrial
sensor with standard M12 4 pin or 5 pin
connector. The 66195044-001 connector is
usually included with every sensor of the above
series for connectorised models.
Use with Series:
940, 941, 944, 947
Housing:
Termination:
Number of pins:
REFERENCE
66195044-001
M12 female, 7 pin (942 Series)
The 66195074-001 is used for the ultrasonic
distance sensor heads 942-A4M. It needs to be
wired and soldered at the setup of the sensor. The
66195074-001 is included in every package of the
942 separate series (942 M3A...) but not in the
spare ultrasonic heads (942-A4M..).
Use with Series:
Housing:
Termination:
Number of pins:
REFERENCE
66195074-001
WITH CABLES
M12 female, 5 pin, 2 metre cable
(supplied with 946 Series)
The 55002 is a 5 pin, M12 female, metal, cable
connector with 2 metres of cable attached. It is
used with the 946 series but may be used for any
industrial sensor with standard M12 4 pin or 5 pin
Plastic
connector. The 55002 cable connector is included
Female M12
with every sensor of the 946 series.
5
Use with Series:
Termination:
Number of pins:
REFERENCE
55002
Female, 8 pin, 2 metre cable (942
Series Compact)
942
The 55195126-001 is an 8 pin, female, metal,
Stainless Steel
cable connector with 2 metres of cable attached.
Female Binder
It used with the 942-A4N compact series. This
7
device is useful but not necessary to setup the
sensor, as every ultrasonic distance sensor 942-
A4N is provided with a female connector without
cable, with pins to solder.
Use with Series:
Housing:
Termination:
Number of pins:
REFERENCE
55195126-001
www.honeywell.com/sensing
ULTRASONIC DISTANCE SENSORS
Mounting Clamps
The 43178389 are plastic mounting clamps
usually used with the ultrasonic distance sensors,
but may be used with any M18 or M30 industrial
sensors. The 43178389 feature 2-part plastic
clamps with 2 M5x60 mm screws and nuts.
OPTIONS
M18
Use with Series:
Housing:
940, 941, 944, 946, 947
Female M12
5
REFERENCE
43178389-018
M30
Use with Series:
Housing:
942
Stainless steel
Female Binder
8
REFERENCE
43178389-030
940
Plastic
942, 944, 946, 947
Plastic
125

Advertisement

loading