Ps16 Circuit Board - Yamaha MG 166CX-USB Service Manual

MG166C-USB/MG166C
3. PS16 Circuit Board (Time required: 18 min.)
3-1 Remove the top cover. (See procedure 1.)
3-2 Remove the MIX16 circuit board and JACK16 circuit
board. (See procedure 2.)
3-3 Remove the three (3) screws marked [190], three (3)
screws marked [200] and three (3) screws marked [220].
The inner chassis with heatsink assembly and USB as-
sembly (MG166C-USB only) can be removed. (Fig. 3)
3-4 Remove the four (4) screws marked [80] and screw marked
[70]. Then remove the heatsink assembly. (Fig. 4)
3-5 Remove the three (3) screws marked [40] and five (5)
screws marked [50] and separate the PS16 circuit board
from the heatsink. (Fig. 4)
[200]
Inner chassis with heatsink assembly and USB assembly
(MG166C-USB only)
[190]
[190]: Bind Head Tapping Screw-B 3x8 MFZN2B3 (WE774400)
[200]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
[220]: PW Head Tapping Screw-B 3x8 MFZN2W3 (WF002600)
(Fig. 3)
[220]
[200]
[190] [190]
Priority Screw
MG166CX-USB/MG166CX/MG166C-USB/MG166C
[40]
[50]
Heatsink
Priority Screw
[80]
[40]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
[50]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
[70]: Bind Head Tapping Screw-B 3x8 MFZN2B3 (WE774400)
[80]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
(Fig. 4)
Heatsink assembly
[50]
[40]
PS16
[70]
[80]
25