Mix16 Circuit Board And Jack16 Circuit Board - Yamaha MG 166CX-USB Service Manual

MG166CX-USB/MG166CX/MG166C-USB/MG166C
2.

MIX16 Circuit Board and JACK16 Circuit Board

(Time required: 18 min.)
2-1 Remove the top cover. (See procedure 1.)
2-2 Remove the fourteen (14) screws marked [350]. (Fig. 2)
2-3 Release the eight (8) hooks and remove the MIX16 cir-
cuit board. (Fig. 2)
2-4 Remove the three (3) screws marked [300] and remove
the JACK16 circuit board. (Fig. 2)
* The buttons, knobs, knob black (WD942200), but-
ton on assembly (WH455200) are not components
of the MX16 circuit board. When replacing the MX16
circuit board, remove these components from the
old circuit board and install them on the new circuit
board.
Hook
Priority Screw [350]
Hook
[350]
Hook
24
[300]
MIX16
[350]
[300]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
[350]: Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)
JACK16
(Fig. 2)
MG166C-USB/MG166C
[350]
Hook
[350]
Hook
MIX16