Yamaha MG 166CX-USB Service Manual page 15

2. MG166CX-USB, MG166CX
MG166C-USB, MG166C
2-1. MG166CX-USB, MG166CX
Install the JACK16X circuit board [Ref. 250].
Note: Pass the connector assembly PS7P [Ref. 40], connector assembly PS3P [Ref. 50] and connector assembly PS5P [* 1
Ref. 60] through the incision part of JACK16X circuit board [Ref. 250].
Note: Pass the connector assembly USB16 [Ref. 100] through the incision part of JACK16X circuit board [Ref. 250].
MG166C-USB, MG166C
Install the JACK16 circuit board [Ref. 250].
Note: Pass the connector assembly PS7P [Ref. 40] and connector assembly PS3P [Ref. 50] through the incision part of
JACK16 circuit board [Ref. 250].
Note: Pass the connector assembly USB16 [Ref. 100] through the incision part of JACK16 circuit board [Ref. 250].
250
* *
2 2
The wiring of the MIX16X circuit board and JACK16X circuit board.
The wiring of the MIX16 circuit board and JACK16 circuit board.
100
* *
2 2
Incision part of JACK16(X) circuit board Incision part of JACK16(X) circuit board
MG166CX-USB/MG166CX/MG166C-USB/MG166C
40 50 60
* *
1 1
15