Setting The Clock - Sony HCD-EC69 Service Manual

Remote
/ (on/standby) button
Press to turn on the system.
CLOCK/TIMER SELECT button
CLOCK/TIMER SET button
Press to set the clock and the Play Timer.
REPEAT/FM MODE button
Press to listen to a disc, a USB device, a single
track or filr repeatedly.
Press to select the FM reception mode
(monaural or stereo).
TUNER/BAND button
Press to select the TUNER function.
Press to select FM or AM reception mode.
FUNCTION button
Press to select the function.
/ (rewind/fast forward) button
Press to find a point in a track or file.
(stop) button
Press to stop playback.
ENTER button
Press to enter the settings.
DISC SKIP button
Press to select a disc.
+ (select folder) button
Press to select a folder.
VOLUME +/− button
Press to adjust the volume.
− (select folder) button
Press to select a folder.
EQ button
Press to select the sound effect.
CLEAR button
Press to delete a pre-programmed track or file.
(play) button
Press to start playback.
(pause) button
Press to pause playback.
/ (go back/go forward) button
Press to select a track or file.
+/– (tuning) button
Press to tune in the desired station.
USB button
Press to select the USB function.
CD button
Press to select the CD function.
TUNER MEMORY button
Press to preset the radio station.
PLAY MODE/TUNING MODE button
Press to select the play mode of a CD or MP3 disc.
Press to select the tuning mode.
DISPLAY button
Press to change the information on the display.
SLEEP button
Press to set the Sleep Timer.
HCD-EC69/EC79/EC99

Setting the clock

Use buttons on the remote to set the
clock.
1
Turn on the system.
Press /.
2
Select the clock set mode.
Press CLOCK/TIMER SET.
If "PLAY SET" flashes, press /
repeatedly to select "CLOCK, " and then
press ENTER.
3
Set the time.
Press / repeatedly to set the
hour, and then press ENTER.
4
Use the same procedure to set the
minutes.
Note
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To display the clock when the system is off
Press DISPLAY repeatedly until the clock is
displayed. The clock is displayed for about 8
seconds.
7