HCD-EC69/EC79/EC99
CD SERVICE MODE
This mode can move the SLED of the optical pick-up, and also can
turn the optical pick-up laser power on and off.
Procedure:
1. Press the [
] button to turn the power on.
?/1
2. Press three buttons of [u], [
+] and [
] simultaneously.
?/1
3. Press the [FUNCTION] button to select CD function.
4. It enters the CD service mode and displays “SERVICE”.
5. To release from this mode, press three buttons of [u], [
+]
and [
] simultaneously.
?/1
Key Operation:
[TUNING + M L], [– TUNING l m]:
Use these keys to move the SLED. When [TUN-
ING + M L] is pressed in this mode, the SLED
moves to outer circumference and the message
“SLED OUT” is displayed.
When [– TUNING l m] is pressed in this
mode, the SLED moves to inner circumference and
the message “SLED IN” is displayed.
[CD]:
Use this key to turn the optical pick-up laser power
on and off. When the laser power is turned on, the
message “LD ON” is displayed. When the laser
power is turned off, the message “LD OFF” is dis-
played.
CD ERROR CODE
The past errors of the CD mechanism (CDM) are displayed as the
CDM Errors, and those of the optical pick-up system (= optical
unit + CD board) are displayed as the BD Errors as shown below.
Procedure:
1. Press the [
] button to turn the power on.
?/1
2. Press the [FUNCTION] button to select CD function.
3. Press three buttons of [
+], [
] and [DISPLAY] simultane-
x
ously.
4. Then, the CDM error code is displayed as “M0xxxxxx” (x
means hexadecimal number) on the liquid crystal display as
shown below.
5. Every pressing of the [TUNING + M L] button in this
mode increments the number after “M” starting from “M0”
up to “M9”, and then returns to “M0”. Every pressing of the
[– TUNING l m] button in this mode decrements the
number after “M”. The smaller the error code number is, the
newer the error content is.
6. When the [CD] button is pressed then, the BD error code is
displayed as “D0xxxxxx” (x means hexadecimal number) on
the liquid crystal display as shown below. In the same way as
the CDM error code, use of the [TUNING + M L] and the
[– TUNING l m] buttons in this mode enables tracing of
the error history.
7. To release from this mode, press the [
] button to turn the
?/1
power off.
Contents of “CDM Errors”
Error display example
M 0 FF 11 42
1 2 3 4
1 It indicates the error history number
0 to 9: The error code number 0 indicates the newest error.