Download Print this page

Honeywell High Gain Omni Directional Antenna User Manual page 12

High gain omni directional antenna


Honeywell Industrial Wireless
Rev. 4
Warning: Always use caution when installing this antenna. You can be
seriously injured if this antenna comes near or in contact with a power line.
Follow all local and national electrical code requirements when installing the
Base Radio with the high gain antenna.
Select the locations for the high gain antenna and Base Radio. The
location for the high gain antenna should be selected based on optimal
positioning for RF communications with the field units.
Any Base Radio with an Omni Directional antenna is for
ordinary locations only.
Position the antenna so that the gold sleeve clears any obstructions.
Mount the antenna using the
2 mounting brackets. One
clamp must be placed at the
center of the gold sleeve, the
other at any point below.
Connect the Base Radio coaxial cable to the antenna and hand tighten.
Wrap the connection with the supplied waterproofing material.
Note: Do not cover the drain holes on the bottom of the antenna as they
provide drainage for moisture.
User Manual
High Gain Omni-Directional Antenna