Table of Contents
Advertisement
4.2 Quickly to Setup a HomeGuard system
To setup the HomeGuard system it needs few steps to complete all the setting:
1.
Connect all the IP cameras and FNS-1020v2 with WBR-6022, then power on all device
2.
Make sure WBR-6022 is connected to internet (If you want to use IP cam function).
3.
Press WPS button on WBR-6022 for 5 Sec
4.
Press WPS button on IP Cam for 5 Sec (step 3. & 4. are optional) then wait for 20 Sec
5.
Search new device and register them each
6.
Change each device name if you need.
7.
Change preferred domain name of WBR-6022 on Level1DNS service
8.
Recording setup if you have FNS-1020v2 registered
9.
View the video form the registered IP cameras
10. Playback: if you have FNS-1020v2, you can record & playback the video.
22
Advertisement
Table of Contents
